Solutions Sealator Pro Black Foam

Solutions Sealator Pro Black Foam, manufactured by Solutions Pest and Lawn, is a durable sealant spray foam uniquely formulated to perform under low-temperature conditions, such as 5 degrees Celsius/41 degrees Fahrenheit, where traditional polyurethane foam sealants fail.

This year-round polyurethane insulating gun foam sealant provides low curing pressure and moderate post expansion in tight, compact areas without damaging frames and building elements such as wood, concrete, stone, plaster, metal, PVC, and polystyrene. 

Solutions Sealator Pro Black Foam is a specially formulated foam sealant that adheres to multiple sealing projects, including small to large penetrations and joints around window and door frames and other sites. This closed cell foam provides excellent performance as well as long-lasting endurance.

Tools Needed

You will need a professional foam applicator gun like the Solutions Polyurethane Foam Gun.

How to Use

• Step 1: Remove dust, loose particles, and grease from the surfaces to be treated. Once the treatment area has been cleaned, remove the lid from the Solutions Sealator Pro Black Foam can.
• Step 2: Connect the spray gun with Solutions Sealator Pro Black Foam and tighten it by rotating until the can is screwed firmly into the gun connection.
• Step 3: Shake the Solutions Sealator Pro Black Foam and gun well up and down, roughly 20 times.
• Step 4: Open the control knob and begin applying Solutions Sealator Pro Black Foam in a continuous spray to the surface by squeezing the trigger, adjusting the amount dispensed by how hard the trigger is squeezed.
• Step 5: Apply the Solutions Sealator Pro Black Foam to the desired surface. When applying foam in layers, moisten slightly between each layer.
• Step 6: Wipe the gun tip with a rag at the end of each use to prevent Solutions Sealator Pro Black Foam from drying on the gun tip.

Where to Use

Solutions Sealator Pro Black Foam may be used to seal joints and penetrations, install window and door frames, and thermal and acoustic insulate.

When to Use

Use Solutions Sealator Pro Black Foam to seal cracks, crevices, holes, and other areas around residential and commercial properties from rodents, insects, reptiles, and other animals.

The recommended temperature of the canister at application is 41 degrees Fahrenheit, though it is most optimal at 68 degrees Fahrenheit. If working in cooler temperatures, the canister should be warmed with water or air.

Safety Information

Solutions Sealator Pro Black Foam is safe to use around children and pets when applied according to the product label instructions. Always wear the proper personal protective equipment (PPE) when handling and applying this product.

If uncured foam makes contact with the skin, immediately rinse with cold water and soap.

Keep this product away from children and pets.

Special Considerations

Solutions Sealator Pro Black Foam cannot be used without a spray foam gun.

Do not clean the gun between cans during continuous use. At the end of an application session, the spray gun may be left attached to Solutions Sealator Pro Black Foam for up to 2 weeks. For longer storage, disconnect the gun from the can and clean it with Foam Gun Cleaner before the next use.

To clean the uncured foam from a surface, use Foam Gun Cleaner. To clean or remove cured foam, remove it mechanically with your hands (while wearing gloves) or a utility knife until the desired amount is removed.