Poly Plugs

{ "41628561145946": {"documents":[],"documents_title":[],"features_and_specs":["Sold As:|Bag of 500 plugs","Target Pests:|Termites","Target Sites:|Structures and Immediate Surroundings, Termite Control","Manufacturer:|Pest Boys","Manufacturer SKU:|50012","ID:|818388"],"product_reference_sku_import_only":"818388","short_bulletpoints":["Can be partially inserted into drill holes to prevent water from draining through slab from storms. After the rain passes, Poly Plugs can be removed so slab leveling materials can be injected below slabs and the plugs can again be reinserted back into drill holes and ready to patch.","Will provide room for expanding freezing soil and moisture to help prevent plugs from being forced up out of drill holes. Installing more ridged plugs such as those made out of wood or plastic would be more easily forced up and out of drill holes.","Can be inserted into drill holes to the depth to a specific depth needed for patching materials to seal holes. If only 3” of patching material is required to seal the holes, technicians could insert Poly Plugs to that specific depth. This would save 25-50% or more of the patching materials and time required to seal every hole saving labor cost also.","If termite or foundation treatment holes are drilled around exteriors of structures and rain storms should suddenly approach, Poly Plugs (closed cell material) can be quickly installed, leaving them just above the top of slabs in order to prevent rain runoffs to enter drill holes prior to, or after treatment. After rains have passed, Poly plugs can either be removed for termite or foundation treatment, or counter sunk to apply patching materials.","Since Poly Plugs are a closed cell material, they will not absorb moisture out of concrete patch. This will allow the concrete to dry evenly. A quick scuff over the concrete patch with your boot after patch has cured for 10 minutes, and the holes are almost undetectable. The plugs will be covered and not seen again."]} , "41628561178714": {"documents":[],"documents_title":[],"features_and_specs":["Sold As:|Bag of 500 plugs","Target Pests:|Termites","Target Sites:|Structures and Immediate Surroundings, Termite Control","Manufacturer:|Pest Boys","Manufacturer SKU:|50038","ID:|818391"],"product_reference_sku_import_only":"818391","short_bulletpoints":["Can be partially inserted into drill holes to prevent water from draining through slab from storms. After the rain passes, Poly Plugs can be removed so slab leveling materials can be injected below slabs and the plugs can again be reinserted back into drill holes and ready to patch.","Will provide room for expanding freezing soil and moisture to help prevent plugs from being forced up out of drill holes. Installing more ridged plugs such as those made out of wood or plastic would be more easily forced up and out of drill holes.","Can be inserted into drill holes to the depth to a specific depth needed for patching materials to seal holes. If only 3” of patching material is required to seal the holes, technicians could insert Poly Plugs to that specific depth. This would save 25-50% or more of the patching materials and time required to seal every hole saving labor cost also.","If termite or foundation treatment holes are drilled around exteriors of structures and rain storms should suddenly approach, Poly Plugs (closed cell material) can be quickly installed, leaving them just above the top of slabs in order to prevent rain runoffs to enter drill holes prior to, or after treatment. After rains have passed, Poly plugs can either be removed for termite or foundation treatment, or counter sunk to apply patching materials.","Since Poly Plugs are a closed cell material, they will not absorb moisture out of concrete patch. This will allow the concrete to dry evenly. A quick scuff over the concrete patch with your boot after patch has cured for 10 minutes, and the holes are almost undetectable. The plugs will be covered and not seen again."]} , "41628561211482": {"documents":[],"documents_title":[],"features_and_specs":["Sold As:|Bag of 500 plugs","Target Pests:|Termites","Target Sites:|Structures and Immediate Surroundings, Termite Control","Manufacturer:|Pest Boys","Manufacturer SKU:|50058","ID:|818390"],"product_reference_sku_import_only":"818390","short_bulletpoints":["Can be partially inserted into drill holes to prevent water from draining through slab from storms. After the rain passes, Poly Plugs can be removed so slab leveling materials can be injected below slabs and the plugs can again be reinserted back into drill holes and ready to patch.","Will provide room for expanding freezing soil and moisture to help prevent plugs from being forced up out of drill holes. Installing more ridged plugs such as those made out of wood or plastic would be more easily forced up and out of drill holes.","Can be inserted into drill holes to the depth to a specific depth needed for patching materials to seal holes. If only 3” of patching material is required to seal the holes, technicians could insert Poly Plugs to that specific depth. This would save 25-50% or more of the patching materials and time required to seal every hole saving labor cost also.","If termite or foundation treatment holes are drilled around exteriors of structures and rain storms should suddenly approach, Poly Plugs (closed cell material) can be quickly installed, leaving them just above the top of slabs in order to prevent rain runoffs to enter drill holes prior to, or after treatment. After rains have passed, Poly plugs can either be removed for termite or foundation treatment, or counter sunk to apply patching materials.","Since Poly Plugs are a closed cell material, they will not absorb moisture out of concrete patch. This will allow the concrete to dry evenly. A quick scuff over the concrete patch with your boot after patch has cured for 10 minutes, and the holes are almost undetectable. The plugs will be covered and not seen again."]} , "41628561244250": {"documents":[],"documents_title":[],"features_and_specs":["Sold As:|Bag of 500 plugs","Target Pests:|Termites","Target Sites:|Structures and Immediate Surroundings, Termite Control","Manufacturer:|Pest Boys","Manufacturer SKU:|50096","ID:|818389"],"product_reference_sku_import_only":"818389","short_bulletpoints":["Can be partially inserted into drill holes to prevent water from draining through slab from storms. After the rain passes, Poly Plugs can be removed so slab leveling materials can be injected below slabs and the plugs can again be reinserted back into drill holes and ready to patch.","Will provide room for expanding freezing soil and moisture to help prevent plugs from being forced up out of drill holes. Installing more ridged plugs such as those made out of wood or plastic would be more easily forced up and out of drill holes.","Can be inserted into drill holes to the depth to a specific depth needed for patching materials to seal holes. If only 3” of patching material is required to seal the holes, technicians could insert Poly Plugs to that specific depth. This would save 25-50% or more of the patching materials and time required to seal every hole saving labor cost also.","If termite or foundation treatment holes are drilled around exteriors of structures and rain storms should suddenly approach, Poly Plugs (closed cell material) can be quickly installed, leaving them just above the top of slabs in order to prevent rain runoffs to enter drill holes prior to, or after treatment. After rains have passed, Poly plugs can either be removed for termite or foundation treatment, or counter sunk to apply patching materials.","Since Poly Plugs are a closed cell material, they will not absorb moisture out of concrete patch. This will allow the concrete to dry evenly. A quick scuff over the concrete patch with your boot after patch has cured for 10 minutes, and the holes are almost undetectable. The plugs will be covered and not seen again."]} }