Termidor 80WG Termiticide

Product Overview

Termidor 80 WG Termiticide/Insecticide, manufactured by BASF, is a water-soluble powder formulated with 80% fipronil. This highly concentrated insecticide controls for termites, beetles, cockroaches, silverfish, and more.

This termiticide and insecticide is great for treating construction sites before foundations are poured, treating outside or inside perimeters of residential or commercial building structures.

Termidor 80 WG Termiticide/Insecticide provides a long term residual effect that provides an insect barrier for up to 6 months. Termidor 80 WG Termiticide/Insecticide is a strong and effective product that offers customers the best defense against termites or other targeted pests.

Tools Needed

For spraying, apply Termidor 80 WG Termiticide/Insecticide with a skid sprayer and a hose with an anti-backflow device or water flow with an air gap to prevent back-siphoning. For injecting treatments, a drill with a masonry bit is needed. A proper trenching tool is needed to remove and replace the dirt. For rodding, a hammer and rebar are needed to make the holes.

How to Use

• Step 1: Remove the Termidor 80 WG packs from the foil package.
• Step 2: Fill the spray tank 1/4 to 1/3 with water.
• Step 3: Start the pump to begin bypass agitation and place the spray gun in the spray tank to allow circulation through the hose.
• Step 4: Drop the correct amount of dissoluble Termidor 80WG packs and the rest of the water into the spray tank to mix the desired diluted solution.
• Step 5: Allow the pump to run and circulate through the hose back into the spray tank until all packs in the spray tank have dissolved and the Termidor 80 WG is thoroughly mixed. Apply Termidor 80 WG as needed.

Where to Use

Termidor 80 WG can be applied at pre- and post-building sites, in crawl spaces, on and under concrete slabs in basements, hollow block foundations or voids, under foundations and slabs, and around the soil near shower drain pans or bath traps. It can also be applied outdoors on trees, around, or injected under pre-existing foundations. However, Termidor 80 WG should only be used indoors when spraying in structural voids or on attached garage floors.

When to Use

This product can prevent or eliminate a termite or insect infestation.  Termidor 80 WG can only be re-applied if it is obvious the first application has faded or there is a clear sign of re-infestation.

Safety Information

Termidor 80 WG Termiticide/Insecticide is safe when applied according to the product label. Do not apply Termidor 80 WG near electrical hazards, to houseboats, playground equipment, pet habitats, or within 60 feet of estuaries.

Special Considerations

Before applying Termidor 80 WG, make sure it cannot drain or run off into neighboring areas where children or pets can come in contact. Termidor 80 WG will dissolve faster when mixed with warm/hot water. Also, Termidor 80 WG is a restricted product and sold to licensed pest control providers.

Bucket Contains: 6 packs x 4 packets x 2.61 oz